BluePrint Engines High Torque 496 CI Base Dressed Crate Engine Chevelle/ El Camino 64-71/ Camaro 67-73

BluePrint Engines:
BP49613CTC

Highlights

  • 451 Horsepower
  • 523 lb-ft of Torque
  • Forged Rotating Assembly
  • 87-Octane Compatible
$12,499.00
Product Description

BluePrint Engines High Torque 496 CI Base Dressed Carbureted Crate Engine for 196-1971 Chevy Chevelles and El Caminos and for 1967-1973 Chevy Camaros.

Put 523 lb-ft of torque to work in your 1960-1987 Chevy C10 or 1988-1998 Chevy C/K with this BluePrint Engines 496 CI high-torque crate engine. Producing 451 horsepower, this carbureted big block combines a hydraulic roller camshaft with an 8.7:1 compression ratio to provide strong low-end torque and responsive street performance while operating on 87-octane gasoline.

A forged steel crankshaft, forged pistons, and H-beam connecting rods provide a solid foundation for the rotating assembly, while aluminum cylinder heads support airflow and combustion efficiency. The base-dressed configuration includes a Holley 750 CFM carburetor, Weiand Stealth dual-plane intake manifold, distributor, and essential engine components for a practical big-block installation.

Features and Benefits:
- 496 CI displacement produces 451 horsepower and 523 lb-ft of torque
- 8.7:1 compression ratio supports operation on 87-octane gasoline
- High-strength cast iron block with 4-bolt main caps
- Standard-deck block with a 1-piece rear main seal
- 4.310" cylinder bore and 4.250" crankshaft stroke
- Mechanical fuel pump provision
- Forged steel crankshaft supports high-torque operation
- H-beam connecting rods with 150,000 PSI bolts
- Forged flat-top pistons with 3cc volume
- Internally balanced rotating assembly
- Aluminum cylinder heads with 119cc combustion chambers
- 315cc intake runners support airflow
- 2.30" intake valves and 1.88" exhaust valves
- Hydraulic roller camshaft supports low-RPM torque production
- Weiand Stealth dual-plane intake manifold
- Holley 750 CFM carburetor
- Base-dressed configuration includes essential engine accessories

Engine Specifications:
- Displacement: 496 CI
- Horsepower: 451 HP
- Torque: 523 lb-ft
- Compression ratio: 8.7:1
- Fuel requirement: 87 octane
- Block material: Cast iron
- Bore: 4.310"
- Stroke: 4.250"
- Connecting rod length: 6.385"
- Crankshaft: Forged steel
- Pistons: Forged flat-top, 3cc
- Rotating assembly: Internally balanced
- Cylinder heads: BluePrint aluminum PS8013
- Combustion chamber: 119cc
- Intake runner volume: 315cc
- Intake valve diameter: 2.30"
- Exhaust valve diameter: 1.88"
- Camshaft: Hydraulic roller
- Intake valve lift: 0.480"
- Exhaust valve lift: 0.483"
- Intake duration at 0.050": 204 degrees
- Exhaust duration at 0.050": 209 degrees
- Lobe separation angle: 115.5 degrees

Kit Includes:
- BluePrint Engines 496 CI base-dressed crate engine
- Weiand Stealth dual-plane intake manifold
- Holley 750 CFM carburetor
- Distributor
- Harmonic balancer
- Timing cover
- Oil pump
- Dipstick
- Oil pan

Vehicle Fitment:
- 1964-1971 Chevy Chevelle
- 1964-1972 Chevy El Camino
- 1967-1973 Chevy Camaro

Please Note:
- Not intended for use in pollution-controlled vehicles.
- Verify header and exhaust clearance before installation.
- BluePrint Engines recommends electric cooling fans capable of at least 4,000 CFM for engines exceeding 400 CI.
- Set initial ignition advance to 13-16 degrees BTDC, with total advance not exceeding 34 degrees BTDC by approximately 4,000 RPM.
- Pre-lubricate the engine before initial startup according to the supplied installation instructions, even though the engine has been dyno-tested.
- Use only a distributor with a melonized iron or steel gear compatible with this engine.
- Bronze and unmelonized cast iron distributor gears can cause engine damage and affect warranty coverage.

California Residents: Proposition 65 Warning

Related Categories: Crate Engines

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles
Installation & Fitment

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Camaro years:

  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,

This product will fit the following Chevelle years:

  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,

This product will fit the following El Camino years:

  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
  1. CHTH37
    $24.99
  2. CHTH38
    $21.99
Add to Cart