AMK Products Master Interior Fastener Kit 319-Piece Deluxe Convertible Camaro 67

Take the guesswork out of reassembling your 1967 Camaro convertible's deluxe interior with this AMK Products master interior fastener kit. This comprehensive 319-piece kit provides approximately 85% of the factory-correct interior hardware required for restoration, eliminating the time and expense of sourcing dozens of individual fastener sets.

Features and Benefits:
- Comprehensive master interior fastener kit
- Designed specifically for 1967 Camaro Convertibles
- Intended for models equipped with Deluxe Interiors
- Complete 319-piece kit
- Provides approximately 85% of the original factory interior hardware
- Factory-style replacement hardware
- Includes hardware for numerous interior components and trim pieces
- Individual hardware sets are packaged by application
- Packages are labeled to simplify identification and placement
- Includes the required quantities for the listed applications
- Eliminates the need to source numerous individual fastener sets
- Ideal for complete interior restoration and reassembly
- Helps maintain a factory-style appearance
- Quality restoration hardware
- Made in the USA

Each group of hardware is individually packaged and thoroughly labeled according to its intended application, making it easier to identify the correct fasteners during assembly. The kit covers components throughout the interior, including the dash, console, door panels, glove box, kick panels, seats, steering column, convertible trim, sun visors, window hardware, and more. This AMK Products kit provides factory-style hardware for a detailed and organized interior restoration.

Kit Includes:
- Air Outlet Bezels with A/C to Dash: Phillips oval and Phillips pan head screws, spring nuts (8 Pieces)
- Ash Tray Retainer: Phillips pan head B screws (4 Pieces)
- Console to Floor: Phillips truss screws, rivet nuts, nuts (6 Pieces)
- Console Ash Tray Door: Rivets, retainers (4 Pieces)
- Console Ash Tray Door Bumpers: .20 D x .12 H flat-top rubber bumpers (4 Pieces)
- Console Bracket and Top Frame: Hex washer machine and Phillips oval screws, spring nuts (9 Pieces)
- Console Door and Hinge: Phillips pan head M screws (8 Pieces)
- Console Door Bumpers: .20 D x .12 H flat-top rubber bumpers (3 Pieces)
- Console Lamp Lens: Chrome Phillips oval F screws (2 Pieces)
- Courtesy Lamps, Underdash: Phillips pan head screw, Phillips pan head AB flat SEMS, washer (3 Pieces)
- Dash Pad: Phillips pan head AB screws (5 Pieces)
- Dimmer Switch: High hex washer AB screws (2 Pieces)
- Door Handle Cups, Deluxe: Chrome Phillips oval SEMS (4 Pieces)
- Inside Door Handles, Deluxe: High hex washer screws (2 Pieces)
- Door Panel Cup Brackets: Phillips pan head AB screws (4 Pieces)
- Door Panels, Deluxe: Clips, flexible plugs, Phillips oval AB SEMS (36 Pieces)
- Fuse Panel to Firewall: #10 x 2-1/4" hex washer AB screws with sealer (2 Pieces)
- Glove Box Bumpers: Rubber bumpers (2 Pieces)
- Glove Box Door: Phillips pan head conical SEMS (2 Pieces)
- Glove Box Latch and Striker: Phillips pan head AB flat SEMS, Phillips pan head T screws (3 Pieces)
- Glove Box Liner: Phillips pan head AB flat SEMS, spring nuts (14 Pieces)
- Heater Control: Phillips pan head AB screws (4 Pieces)
- Instrument Bezel to Dash: Phillips oval AB screws, spring nuts (14 Pieces)
- Insulation to Firewall: Rubber retainers (4 Pieces)
- Kick Panels: Chrome Phillips oval finish washer SEMS, .50 D (10 Pieces)
- Inside Mirror to Bracket: Chrome slotted oval shoulder screw, bushing (2 Pieces)
- Convertible Header Moldings: Stainless steel/chrome Phillips oval AB screws (7 Pieces)
- Convertible Pillar Moldings: Phillips oval AB flush SEMS (4 Pieces)
- Convertible Quarter Trim Panels: Chrome Phillips oval AB finish washer SEMS, .50 D (8 Pieces)
- Radio and Bracket: Hex washer and pan truss screws, spring nuts (8 Pieces)
- Radio Control Shafts and Knobs: Special thin hex nuts, split washers (4 Pieces)
- Radio Opening Trim Plate and Retainer: Pan head AB screws (5 Pieces)
- Rocker Panel Cover Plates: Phillips pan head AB screws (8 Pieces)
- Scuff Plates at Door Opening: Stainless steel/chrome Phillips oval AB screws (8 Pieces)
- Front Seat Back Stop Bumpers: Chrome Phillips pan head AB screws (2 Pieces)
- Front Seat Back Strikers: Trim hex .62 conical SEMS with pilot (4 Pieces)
- Rear Seat Back to Floor: Hex AB conical tooth SEMS (2 Pieces)
- Seat Back Panels: Phillips pan head .50 flat SEMS, Phillips oval AB screws (8 Pieces)
- Seat Back Pivots: Retaining clips (4 Pieces)
- Seat Back Stop Cable, RH Only: Phillips wafer machine shoulder screws (2 Pieces)
- Seat Belt Buckle Retainers: Chrome Phillips oval screws, flat spring nuts (4 Pieces)
- Seat Pivot Covers: Split dart metal retainers (4 Pieces)
- Seat Tracks to Floor: Hex conical tooth .88 D SEMS (8 Pieces)
- Shifter Bezel Retainers, Automatic/Manual: Oval screws and stamped nuts (14 Pieces)
- Shifter Plate and Boot Retainer, 4-Speed: Phillips oval AB and BT screws (8 Pieces)
- Speakers and Grilles at Kick Panels: Phillips oval AB screws, spring nuts (16 Pieces)
- Steering Column and Braces to Dash: Hex conical SEMS, hex bolts, flange nuts (9 Pieces)
- Steering Column Cover to Dash: Phillips pan head conical SEMS machine screws (4 Pieces)
- Steering Column Cover to Firewall: Hex AB flat SEMS with sealer (2 Pieces)
- Steering Column Seal Retainer: Flat SEMS, hex washer screws, seal washers (5 Pieces)
- Convertible Sun Visor and Mirror Brackets: Stainless steel/chrome Phillips oval machine screws (7 Pieces)
- Sun Visor Clamps: Chrome slotted fill screws (2 Pieces)
- Turn Signal Lever: Phillips pan head T screw (1 Piece)
- Vent Window Channel to Door: #10 x 3" stainless steel/chrome Phillips oval screws (2 Pieces)
- Quarter Glass "U" Weatherstrip: .28 D Phillips round washer AB screws (4 Pieces)
- Window Crank Handles: Retaining clips (4 Pieces)

Vehicle Fitment:
- 1967 Camaro convertible with deluxe interior