AMK Products Master Interior Fastener Kit 421-Piece Standard Coupe Camaro 68

Take the guesswork out of reassembling your 1968 Camaro Coupe's Standard Interior with this AMK Products Master Interior Fastener Kit. This comprehensive 421-piece kit provides approximately 85% of the original factory interior hardware, saving the time and effort involved with identifying and purchasing numerous individual fastener sets during a restoration.

Features and Benefits:
- Comprehensive master interior fastener kit
- Designed specifically for 1968 Camaro Coupes
- Intended for models equipped with Standard Interiors
- Complete 421-piece kit
- Provides approximately 85% of the original factory interior hardware
- Factory-style replacement hardware
- Includes hardware for numerous interior components and trim pieces
- Individual hardware sets are packaged by application
- Detailed package labeling helps identify proper placement
- Includes specified hardware quantities for each listed application
- Eliminates the need to source numerous individual fastener sets
- Ideal for complete interior restoration and reassembly
- Helps maintain a factory-style appearance
- Quality restoration hardware
- Made in the USA

Each group of hardware is individually packaged and thoroughly labeled according to its intended application, making it easier to identify and install the correct fasteners throughout your Camaro's interior. The kit covers numerous components, including the dash, console, Standard door panels, armrests, glove box, headliner, kick panels, seats, rear trim, steering column, sun visors, ventilation components, and window hardware. Made in the USA, this AMK Products kit provides factory-style replacement hardware for an organized and detailed interior restoration.

Kit Includes:
- Air Outlet Bezels with A/C to Dash: Phillips oval and Phillips pan head screws, spring nuts (8 Pieces)
- Air Vents at Door Jamb: .28 D Phillips truss washer AB screws (2 Pieces)
- Armrest Pad and Base at Front Doors: Chrome Phillips round and Phillips flat screws (10 pieces)
- Ash Tray Retainer: Phillips pan head AB screws (3 Pieces)
- Coat Hook: Chrome Phillips pan head screws (2 Pieces)
- Console Ash Tray Door: Pins, retainers (4 Pieces)
- Console to Floor: Hex pilot point conical SEMS, rivet nuts, flange nuts (6 Pieces)
- Console Ash Tray Door Bumpers: Rubber bumpers (4 Pieces)
- Console Door and Hinge: Phillips pan head screws (8 Pieces)
- Console Door Bumpers: .31 D x .15 H flat-top rubber bumpers (2 Pieces)
- Console Insert and Emblem: Stamped nuts, flat washers (10 Pieces)
- Console Lamp Lens: Hex washer BT screws (2 Pieces)
- Console Top Frame and Brackets: Hex washer and Phillips pan head BT screws (9 Pieces)
- Dash Pad: Phillips pan head AB screws, stamped nuts (9 Pieces)
- Dimmer Switch: High hex washer AB screws (2 Pieces)
- Dome Lamp: Phillips pan head AB screws (2 Pieces)
- Inside Door Handles, Standard: Wire retainers (2 Pieces)
- Door Panels: Clips, flexible plugs, Phillips oval AB SEMS (32 Pieces)
- Filler Panels at Rear Seat Back Sides: Chrome Phillips oval and Phillips pan head screws (14 Pieces)
- Folding Seat Back: Chrome Phillips oval AB screws (7 Pieces)
- Folding Seat Back Partition Trim: #8 x 3/4" Phillips oval AB .50 finish SEMS, chrome (3 Pieces)
- Fuse Panel to Firewall: #10 x 2-1/4" hex washer AB screws with sealer (2 Pieces)
- Glove Box Bumpers: Rubber bumpers (2 Pieces)
- Glove Box Door: Phillips pan head conical SEMS (2 Pieces)
- Glove Box Latch and Striker: Phillips pan head AB flat SEMS, Phillips pan head T screws (3 Pieces)
- Glove Box Liner: Phillips pan head AB flat SEMS, spring nuts (14 Pieces)
- Headliner Tack Strip, Front: Phillips round washer AB screws (8 Pieces)
- Headliner Tack Strips, Rear: T-shaped retainers, round washer AB screws (16 Pieces)
- Heater Control: Phillips pan head AB screws (4 Pieces)
- Instrument Bezel to Dash: Phillips oval AB screws, spring nuts (14 Pieces)
- Insulation to Firewall: Rubber retainers (4 Pieces)
- Kick Panels: Chrome Phillips oval finish washer SEMS, .50 D (10 Pieces)
- Inside Mirror to Bracket: Chrome slotted oval shoulder screw, bushing (2 Pieces)
- Coupe Pillar Moldings: Phillips oval AB flush SEMS (6 Pieces)
- Standard Coupe Quarter Trim Panels: Chrome Phillips pan head AB screws (2 Pieces)
- Quarter Trim Panels at Rear Window Sides: Phillips oval AB screws (4 Pieces)
- Quarter Trim Sail Panels: Retaining clips (6 Pieces)
- Radio and Bracket: Hex washer and pan truss screws, spring nuts (8 Pieces)
- Radio Control Shafts and Knobs: Special thin hex nut, spring washers (3 Pieces)
- Radio Opening Trim Plate and Retainer: Pan head AB screws (5 Pieces)
- Rocker Panel Cover Plates: Phillips pan head AB screws (8 Pieces)
- Scuff Plates at Door Opening: Stainless steel/chrome Phillips oval AB screws (8 Pieces)
- Front Seat Back Stop Bumpers: Chrome Phillips pan head AB screws (2 Pieces)
- Front Seat Back Strikers: Trim hex .62 conical SEMS with pilot (4 Pieces)
- Rear Seat Back to Floor: Hex AB conical tooth SEMS (2 Pieces)
- Seat Back Panels: Phillips pan head .50 flat SEMS, Phillips oval AB screws (8 Pieces)
- Seat Back Pivots: Retaining clips (4 Pieces)
- Seat Back Stop Cable, RH Only: Phillips wafer machine shoulder screws (2 Pieces)
- Seat Belt Shoulder Harness Retainers: Chrome Phillips oval AB screws (8 Pieces)
- Seat Pivot Covers: Split dart metal retainers (4 Pieces)
- Seat Tracks to Floor: Hex conical tooth .88 D SEMS (8 Pieces)
- Shifter Bezel Retainers, Automatic/Manual: Oval screws and stamped nuts (16 Pieces)
- Shifter Plate and Boot Retainer, 4-Speed: Phillips oval T and BT screws (7 Pieces)
- Stereo Coupe Speakers to Rear Shelf: Phillips oval machine screws, external KEPS nuts (16 Pieces)
- Speakers and Grilles at Kick Panels: Phillips oval AB screws, spring nuts (16 Pieces)
- Steering Column and Braces to Dash: Hex conical SEMS, hex bolts, flange nuts (9 Pieces)
- Steering Column Cover to Dash: Phillips pan head conical SEMS machine screws (4 Pieces)
- Steering Column Cover to Firewall: Hex AB flat SEMS with sealer (2 Pieces)
- Steering Column Seal Retainer: Flat SEMS, hex washer screws, seal washers (5 Pieces)
- Steering Wheel Shroud: Phillips pan head F screws (3 Pieces)
- Steering Wheel Shroud Emblem: Stamped nuts (2 Pieces)
- Coupe Sun Visor and Mirror Brackets: Chrome Phillips oval and Phillips pan head AB screws (9 Pieces)
- Sun Visor Clamps: Chrome slotted fill screws (2 Pieces)
- Turn Signal Lever: Phillips pan head T screw (1 Piece)
- Ventilation Outlet Bezels: Chrome Phillips oval AB screws, spring nuts (6 Pieces)
- Quarter Glass "U" Weatherstrip: .28 D Phillips round washer AB screws (4 Pieces)
- Window Crank Handles: Retaining clips (4 Pieces)

Vehicle Fitment:
- 1968 Camaro Coupe with Standard Interior