AMK Products Master Interior Fastener Kit 418-Piece Standard Coupe Camaro 69

Take the guesswork out of reassembling your 1969 Camaro Coupe's Standard Interior with this AMK Products Master Interior Fastener Kit. This comprehensive kit includes individually packaged and labeled factory-style hardware for numerous interior components. The 418-piece kit provides approximately 85% of the original factory interior hardware, which will save you the time and expense of identifying and purchasing various individual fastener sets during a restoration.

Features and Benefits:
- Comprehensive master interior fastener kit
- Designed specifically for 1969 Camaro Coupes
- Intended for models equipped with Standard Interiors
- Complete 418-piece kit
- Provides approximately 85% of the original factory interior hardware
- Factory-style replacement hardware
- Includes hardware for numerous interior components and trim pieces
- Individual hardware sets are packaged by application
- Detailed package labeling helps identify proper placement
- Includes specified hardware quantities for each listed application
- Reduces the need to source numerous individual fastener sets
- Ideal for interior restoration and reassembly
- Helps maintain a factory-style appearance
- Quality restoration hardware
- Made in the USA

Each group of hardware is individually packaged and thoroughly labeled according to its intended application, making it easier to identify and install the correct fasteners throughout your Camaro's interior. The kit covers numerous components, including the dash, console, Standard door panels and handles, glove box, headliner, kick panels, seats, steering column, Coupe pillar moldings, quarter trim, sun visors, speakers, and window hardware. This AMK Products kit provides factory-style replacement hardware for an organized and detailed interior restoration.

Kit Includes:
- Air Outlet Bezels with A/C to Dash: Phillips oval and hex SEMS, spring nuts, washers (11 Pieces)
- Air Vents at Door Jamb: .28 D Phillips truss washer AB screws (2 Pieces)
- Armrest Pad and Base at Front Doors: Chrome Phillips round and Phillips flat screws (10 Pieces)
- Ash Tray Retainer: Phillips pan B screws (4 Pieces)
- Coat Hook: Chrome Phillips pan screws (2 Pieces)
- Console Ash Tray Door: Pins, retainers (4 Pieces)
- Console to Floor: Hex pilot point conical SEMS, rivet nuts, flange nuts (6 Pieces)
- Console Ash Tray Door Bumpers: Rubber bumpers (4 Pieces)
- Console Door and Hinge: High-hex washer and Phillips pan screws (8 Pieces)
- Console Door Bumpers: .31 D x .15 H flat-top rubber bumpers (2 Pieces)
- Console Insert and Emblem: Stamped nuts, flat washers (10 Pieces)
- Console Lamp Lens: Hex washer thread-cutting screws (2 Pieces)
- Console Top Frame and Brackets: Hex washer and Phillips pan thread-cutting screws (9 Pieces)
- Dash Pad: Special screws, nuts, retainers (22 Pieces)
- Dimmer Switch: Hex washer AB screws (2 Pieces)
- Dome Lamp: Phillips pan AB screws (2 Pieces)
- Inside Door Handles, Standard: Wire retainers (2 Pieces)
- Door Panels: Clips, flexible plugs, Phillips oval AB SEMS (32 Pieces)
- Filler Panels at Rear Seat Back Sides: Chrome Phillips oval and Phillips pan screws (14 Pieces)
- Folding Seat Back: Chrome Phillips oval AB screws (7 Pieces)
- Folding Seat Back Partition Trim: #8 x 3/4" Phillips oval AB .50 finish SEMS, chrome (3 Pieces)
- Fuse Panel to Firewall: #10 x 2-1/4" hex washer AB screws with sealer (2 Pieces)
- Glove Box Bumpers: Rubber bumpers (2 Pieces)
- Glove Box Door: Hex AB flat SEMS (3 Pieces)
- Glove Box Liner: Phillips pan AB flat SEMS (6 Pieces)
- Glove Box Striker: Phillips pan AB flat SEMS (2 Pieces)
- Front Headliner Tack Strip: Phillips round washer AB screws (8 Pieces)
- Rear Headliner Tack Strips: T-shaped retainers, round washer AB screws (16 Pieces)
- Heater Control to Dash: Phillips oval AB flush SEMS, spring nuts (8 Pieces)
- Instrument Bezel to Dash: Hex flat AB SEMS, spring nuts, conical KEPS (16 Pieces)
- Insulation to Firewall: Rubber retainers (4 Pieces)
- Kick Panels: Chrome Phillips oval finish washer SEMS, .50 D (10 Pieces)
- Inside Mirror to Bracket: Chrome slotted oval shoulder screw, bushing (2 Pieces)
- "Astro Ventilation" Nameplate: Stamped nuts (2 Pieces)
- Right-Hand Dash "Camaro" Nameplate, Standard: Stamped nuts (3 Pieces)
- Coupe Pillar Moldings: Phillips oval AB flush SEMS (6 Pieces)
- Standard Coupe Quarter Trim Panels: Chrome Phillips pan AB screws (2 Pieces)
- Quarter Trim Panels at Rear Window Sides: Phillips oval AB screws (4 Pieces)
- Quarter Trim Sail Panels: Retaining clips (6 Pieces)
- Radio Brackets: Hex washer AB screws, spring nuts (4 Pieces)
- Radio Control Shafts and Knobs, Early 70F: Slotted nuts, Teflon washers (4 Pieces)
- Rocker Panel Cover Plates: Phillips pan AB screws (8 Pieces)
- Scuff Plates at Door Opening: Stainless steel/chrome Phillips oval AB screws (8 Pieces)
- Front Seat Back Stop Bumpers: Chrome Phillips pan AB screws (2 Pieces)
- Front Seat Back Strikers: Trim hex .62 conical SEMS with pilot (4 Pieces)
- Rear Seat Back to Floor: Hex AB conical tooth SEMS (2 Pieces)
- Seat Back Panels: Phillips pan AB .50 flat SEMS, Phillips oval AB screws (8 Pieces)
- Seat Back Pivots: Retaining clips (4 Pieces)
- Seat Back Stop Cable, RH Only: Phillips wafer machine shoulder screws (2 Pieces)
- Seat Belt Shoulder Harness Retainers: Chrome Phillips oval AB screws (8 Pieces)
- Seat Pivot Covers: Split dart metal retainers (4 Pieces)
- Seat Tracks to Floor: Hex conical tooth .88 D SEMS (8 Pieces)
- Stereo Coupe Speakers to Rear Shelf: Phillips oval machine screws, external KEPS nuts (16 Pieces)
- Speakers and Grilles at Kick Panels: Phillips oval AB screws, spring nuts (16 Pieces)
- Steering Column and Braces to Dash: Hex SEMS, flange nuts, copper plate screws (8 Pieces)
- Lower Steering Column Cover: Hex AB flat SEMS with sealer (2 Pieces)
- Steering Column Cover to Dash: Phillips oval AB flush SEMS, spring nuts (4 Pieces)
- Steering Column Seal Retainer: Hex AB flat SEMS, hex washer AB screws (6 Pieces)
- Steering Wheel Shroud: Phillips pan external SEMS (4 Pieces)
- Steering Wheel Shroud Emblem: Stamped nuts (2 Pieces)
- Coupe Sun Visor and Mirror Brackets: Chrome Phillips oval and Phillips pan AB screws (9 Pieces)
- Sun Visor Clamps: Chrome slotted fill screws (2 Pieces)
- Turn Signal Lever: Phillips pan AB screw (1 Piece)
- Quarter Glass "U" Weatherstrip: .28 D Phillips round washer AB screws (4 Pieces)
- Window Crank Handles: Retaining clips (4 Pieces)

Vehicle Fitment:
- 1969 Camaro Coupe with Standard Interior